Electric Heater Boiler 250Kw The Maximum Outlet Temperature Of Electric Hot Water Heating Boiler Can Reach 85 ℃
Advantages Of Electric Heater Boiler:
The appearance of the electric heater boiler is generous and simple. The remote control function of touch control is mobile phone remote control. The efficiency of the electric heater boiler is more than 98%. It is the leader of the whole series of heating products and high-end heating solutions. It is energy-saving, safe and environmental friendly, and intelligent control is convenient for management. The heating, bathing and domestic water are solved together. The flexible control of the electric heater boiler can control the water temperature and match the temperature control, and the intelligent room temperature control in different periods, WiFi remote control, as well as integration with future smart home control, permanent constant power of magnetized water technology, ultra quiet technology, advanced ultra audio frequency conversion and no fan return water cooling technology, reduce noise pollution to a low level.
Electric Heater Boiler Technical Parameter:
Serial number | Product model | Company | LC-L-250kw |
1 | Rated power | KW | 250 |
2 | Rated current | A | 380 |
3 | Heating area | ㎡ | 2500-3500 |
4 | input voltage | 50HZ | 380V |
5 | Minimum flow of water pump configuration | L/min | 230 |
6 | Hot water yield 50 ℃ | L/min | 117 |
7 | Design thermal efficiency | ℃ | 98% |
8 | Maximum water temperature | ℃ | 85 |
9 | Low temperature protection temperature | ℃ | 5 |
10 | Overall dimension (length * width * height) | mm | 1200L*1100W*1750H |
11 | Water inlet and outlet interface | DN | 80 |
Why Does The Electric Heater Boiler Consume Electricity
1. Terminal aging
If the heating end equipment is aging, scaling, rusting and other problems occur, then the thermal efficiency will decrease, resulting in a waste of energy.
2. Unreasonable pipeline design
Unreasonable pipeline design will also lead to increasing energy consumption of electromagnetic boilers. For example, the pipelines are too disordered, too long, and too many bends. In addition, there is no targeted temperature control for each room, resulting in a waste of heating energy and an increase in energy consumption.
3. Frequent power failure
If the electric heater boiler is often powered off, it will have a certain impact on the service life of the equipment, and will also have a certain impact on the thermal efficiency of the equipment, resulting in increased energy consumption of the equipment. The electromagnetic boiler can also cause this problem if it is often switched on and off. Like other electrical appliances, the power consumption is very large when it is started. This is actually similar to the air conditioner. If there is no one at home, the heating temperature can be reduced, which can reduce the operating cost. However, if it is frequently switched on and off, the energy consumption will increase correspondingly.
4. Buy cheap electric heaters and boilers
When purchasing electric heater boilers, some enterprises do not strictly control the quality in order to reduce the cost of the enterprise. Although the price of such equipment is relatively low and the initial investment is low, the efficiency of the equipment is relatively poor, the failure rate is higher, and the maintenance cost is relatively high. Therefore, the energy consumption will be very high and the operation cost will be much higher during long-term use. As the saying goes, you get what you pay for. Therefore, it is not recommended that users buy cheap electromagnetic boilers