Electric Heater Boiler:1050Kw Heating Area: 12000㎡-17000㎡ Intelligent Constant Temperature Control System
What Is An Electric Heater Boiler:
The electric heater boiler, as its name implies, refers to an energy conversion equipment that uses combustion power as its energy. It is a boiler product that converts other energy through the boiler, and then heats the boiler body to produce steam or hot water. Generally speaking, it is a boiler that burns electricity.
Electric Heater Boiler Technical Parameter:
Serial number | Product model | Company | LC-L-1050kw |
1 | Rated power | KW | 1050 |
2 | Rated current | A | 1596 |
3 | Heating area | ㎡ | 10000-15000 |
4 | input voltage | 50HZ | 380V |
5 | Minimum flow of water pump configuration | L/min | 1800 |
6 | Hot water yield 50 ℃ | L/min | 491 |
7 | Design thermal efficiency | ℃ | 98% |
8 | Maximum water temperature | ℃ | 85 |
9 | Low temperature protection temperature | ℃ | 5 |
10 | Overall dimension (length * width * height) | mm | 4600L*1200W*2000H |
11 | Water inlet and outlet interface | DN | 125 |
Usage Skills Of Electric Heater Boiler:
1. After the heating period starts, the electromagnetic heating boiler will drive out the cold radiation in the room for a period of time, which is very expensive. Please do not shut down the heating furnace because of the high initial cost. It is more cost-effective to carry out this step when the temperature difference between indoor and outdoor is small than to store heat after entering the cold period.
2. The operation cost of the electromagnetic boiler is relatively high in the initial use and initial use, and is reduced to the stable stage after reaching the stable working state. The heating period lasts for 4.5 months. Please comprehensively calculate the cost of the whole heating period.
3. The thermal insulation performance of the house is directly related to the power consumption of the system. The better the overall insulation performance of the building, the better the insulation and sealing of doors and windows, the smaller the heat loss, the smaller the environmental temperature difference and the lower the power consumption.
4. Opening doors and windows in winter will greatly increase the indoor heat load. In addition, the gap between doors and windows will also affect the heat load, so it is recommended that you try to reduce the number of times of opening doors and windows.
5. Due to different living conditions, the heat load ratio between households is different, and the heat load of adjacent rooms without users is larger than that of users, so the power consumption is also relatively increased.
6. For the houses occupied that year, there will be a small amount of water in the filling layer and insulation layer, which will cause heat loss. The electricity consumption in the first heating period will be slightly higher, and the cost will be reduced from the second heating period after occupancy.